4.99.22 doesn't work like expected in Russia

感谢,已下载

1 个赞

.21 version encountered sudden problem today though...Japan Tokyo server.
The connection was more instable,I totally cant reach a connetion using version 4.99.22

一定是开启了全局VPN或系统代理?但最好是都不开,而在程序自身内部设置代理。参考:Can't connect to the Internet thru Android hotspot on ver 4.99 or beyond - #4,来自 匿名1147
GitHub - aiqinxuancai/discord-proxy at v0.0.13

试试不断更新的V5?Geph5 testing guide - HackMD

Yes, my first message and further testing were all about the use case where Network Level VPN is turned on. Otherwise thanks to the local censorship I can use neither Element nor Discord. And not sure how to set the in-app proxy for those, especially for Discord.

image

here :-1:
image

一般无需开启VPN或系统代理,需要代理的应用尽量在其内部设置代理,如浏览器使用代理扩展自动控制(或代理或直连)。。。此时可同时正常运行N个端口不同的代理,一个浏览、一个下载、一个。。。

尤其是


此时系统代理或许强于VPN,当然不是迷雾通的”自动配置代理“格式(单一端口),貌似赛风的系统代理格式(双重端口)更好?
V4.99.X是V4的壳V5的核,有条件可以试试V5。。。

geph 4.99.22引入了fakedns功能,可能会导致部分软件不正常。

2 个赞

V5也是 spoof_dns: true 不可修改

2 个赞

An update for late readers. Version .24 actually works with both Element and Discord but you have to disable 'Network-level VPN'. I wonder if it will work with other apps (eventually in Russia they will ban Steam for example).

4.99.22+以上的版本在Windows系统下无法打开YouTube,即使切换到香港手机的网络下,还是无法打开YouTube,而且IP并不是在标题节点中的国家,比如我选择瑞士节点,结果谷歌首页显示我在日本。Mac系统依旧一切正常。请问解决办法。

WIN10PRO,迷雾通V4.99.24强制桥接,其它设置全部关闭,谷歌浏览器采用代理扩展,油管等正常。荷兰节点

看来是Edge浏览器的问题

1 个赞

Edge浏览器有些设置并非默认,自己琢磨一下。。。

我改了Edge的DNS服务提供商,然后就可以了。

1 个赞

I just tried this. Problem is, the utility requires having a local proxy address (the offered 127.0.0.1:1081 being clearly a placeholder). Which for Geph is... what? I tried just the address of the server listed on Geph's main. I tried adding the Listening Port there in the same format.

It didn't work. I'm pretty sure I followed instructions well.

To clarify: I did also try 127.0.0.1:1081, as per the letter of instruction, just in case. But it doesn't work, the launch still fails at the update check.

仅提供一个可行方案,没用过,请向该项目咨询。

--a=--proxy-server=http://127.0.0.1:1081

其中的1081也许是1080的笔误,你也许可以用迷雾通V4.99.X的9910,也可以采用迷雾通V5的自定义端口。。。

Well, you see. I arranged this screencap. The DLL dutifully copied (of correct version too for my system), the address is taken from Geph's own data. It doesn't work. Will try more, of course, but so far no luck.

178.249.213.174:9910?127.0.0.1:9910 or

--a=--proxy-server=socks5://127.0.0.1:9909

(accidentally deleted my previous reply, but for posterity - yes, it works now)

1 个赞